Skip to content

Persistent Memory Commands

This section covers commands related to the discovery and configuration of HPE Persistent Memory.

Clear Pending Configuration Command

Syntax

clearpmmpendingconfig

Description

Clears all pending persistent memory configuration tasks.

Parameters

  • -h, --help

Displays help on the usage of this command.

Examples

Clear all pending persistent memory configuration tasks.

iLOrest > clearpmmpendingconfig

Deleted Task #1948
Deleted Task #1949
Deleted Task #1950
Deleted Task #1951
Deleted Task #1952
Deleted Task #1953

Persistent Memory Advanced Configuration Command

Syntax

provisionpmm [-h | --help] [-m | --memory-mode=(0|%)] [-i | --pmem-interleave=(On|Off)] [-pid | --proc=(processorID)] [-f | --force]

Description

Applies user specified configuration to persistent memory modules.

Parameters

  • -h, --help

Displays help on the usage of this command.

  • -m, --memory-mode

Optionally allows user to specify the percentage of total capacity that should be configured as Volatile. Defaults to 0% Volatile. The remaining capacity will be configured as Persistent.

  • -i, --pmem-interleave

Indicates whether the persistent memory regions should be interleaved or not (Allowed values: "on", "off").

  • -p, --proc

Optionally allows user to specify the processors (comma separated list of ProcessorNumbers) on which the selected configuration would be applied. Defaults to all processors.

  • -f, --force

Allow the user to force the configuration by automatically accepting any prompts.

Examples

Configure all persistent memory modules on processors 1 and 3 to 50% Volatile with no persistent interleave regions.

iLOrest > provisionpmm -m 50 -i off -pid 1,3

***WARNING: Configuration changes require reboot to take effect***

Operation    PmemSize    VolatileSize    DimmIds
CREATE       63.19 GB    63.19 GB        1@1
CREATE       63.19 GB    63.19 GB        1@12
CREATE       63.19 GB    63.19 GB        3@1
CREATE       63.19 GB    63.19 GB        3@12

Example: Configure all installed persistent memory modules to 25% Volatile with persistent interleave regions.

iLOrest > provisionpmm -m 25 -i on

***WARNING: Configuration changes require reboot to take effect***

Operation    PmemSize    VolatileSize    DimmIds
DELETE       126.0 GB    126.76 GB       1@1, 1@12
DELETE       126.0 GB    126.76 GB       2@1, 2@12
CREATE       189.57 GB   63.19 GB        1@1, 1@12
CREATE       189.57 GB   63.19 GB        2@1, 2@12

Persistent Memory Discovery Command

Syntax

showpmm --device | -D [--dimm=(DIMM IDs) | -I] [--json | -j]

showpmm --pmmconfig | -C [--dimm=(DIMM IDs) | -I] [--json | -j]

showpmm --logical | -L [--json | -j]

showpmm --summary | -M [--json | -j]

Description

Displays information about the installed persistent memory modules.

Parameters

  • -h, --help

Displays help on the usage of this command.

  • -D, --device

Shows a physical overview of installed persistent memory modules.

  • -C, --pmmconfig

Shows the current configuration of installed persistent memory modules.

  • -L, --logical

Shows the persistent interleave sets (if present).

  • -M, --summary

Shows a summary of the installed persistent memory modules.

  • -I, --dimm

Optionally use this flag to filter output by DIMM IDs (ProcessorNumber@SlotNumber). Can be used in conjunction with the -D | --device or the -C | --pmmconfig flags.

  • -j, --json

Optionally use this flag to display output in JSON format.

Examples

Show information about the physical persistent memory modules.

iLOrest > showpmm --device

Location        Capacity    Status    DIMMStatus    Life    FWVersion
PROC 1 DIMM 1   126.38 GB   OK        GoodInUse     100%    01.02.00.5360
PROC 1 DIMM 12  126.38 GB   OK        GoodInUse     100%    01.02.00.5360
PROC 2 DIMM 1   126.38 GB   OK        GoodInUse     100%    01.02.00.5360
PROC 2 DIMM 12  126.38 GB   OK        GoodInUse     100%    01.02.00.5360

Show current configuration of selected persistent memory modules.

iLOrest > showpmm --pmmconfig --dimm=1@12,2@12

Location        VolatileSize    PmemSize    PmemInterleaved
PROC 1 DIMM 12  126.38 GB       0.0 GB      N/A
PROC 2 DIMM 12  126.38 GB       0.0 GB      N/A

Show the persistent interleave regions in JSON format.

iLOrest > showpmm --logical --dimm=1@12,2@12

[ { 'DimmIds': '1@1, 1@12',
    'PmemSize': { 'Units': 'GB',
                  'Value': 252.0}},
  { 'DimmIds': '2@1, 2@12',
    'PmemSize': { 'Units': 'GB',
                  'Value': 252.0}}]

Show a summary of the persistent memory resources.

iLOrest > showpmm --summary

TotalCapacity:  505.52 GB
TotalVolatileSize:  505.52 GB
TotalPmemSize:  0.0 GB

Persistent Memory Guided Configuration Command

Syntax

applypmmconfig -L | --list

applypmmconfig -C | --pmmconfig [-f | --force]

Description

Apply a predefined configuration to installed persistent memory modules.

Parameters

  • -h, --help

Displays help on the usage of this command.

  • -L, --list

Display a list of available predefined configIDs along with a brief description.

  • -C, --pmmconfig

Specify one of the predefined configIDs to apply to all persistent memory modules.

  • -f, --force

Allow the user to force the configuration by automatically accepting any prompts.

Examples

Show a list of supported guided configurations.

iLOrest > applypmmconfig --list

Available Configurations:

MemoryMode
        Configure all PMMs to 100% Memory Mode.
PmemInterleaved
        Configure all PMMs to 100% Persistent. Interleave the Persistent memory regions within each processor.
PmemNotInterleaved
        Configure all PMMs to 100% Persistent. The Persistent memory regions are not interleaved.

Configure all installed persistent memory modules as 100% Volatile.

iLOrest > applypmmconfig --pmmconfig MemoryMode

***WARNING: Configuration changes require reboot to take effect***

Operation    PmemSize    VolatileSize    DimmIds
CREATE       0.0 GB      252.76 GB       1@1, 1@12
CREATE       0.0 GB      252.76 GB       2@1, 2@12

Show Pending Configuration Command

Syntax

showpmmpendingconfig [-j | --json]

Description

Shows the queued tasks pending a reboot for configuring persistent memory modules.

Parameters

  • -h, --help

Displays help on the usage of this command.

  • -j, --json

Optionally use this flag to display output in JSON format.

Examples

Show persistent memory configuration changes pending a reboot.

iLOrest > showpmmpendingconfig

Operation    PmemSize    VolatileSize    DimmIds
DELETE       190.0 GB    62.76 GB        1@1, 1@12
DELETE       190.0 GB    62.76 GB        2@1, 2@12
CREATE       94.78 GB    31.59 GB        1@1
CREATE       94.78 GB    31.59 GB        1@12
CREATE       94.78 GB    31.59 GB        2@1
CREATE       94.78 GB    31.59 GB        2@12

Syntax

showrecommendedpmmconfig

Description

Shows the recommended persistent memory configurations.

Parameters

  • -h, --help

Displays help on the usage of this command.

Examples

Show a list of recommended persistent memory configurations

iLOrest > showrecommendedpmmconfig

MemoryModeTotalSize    PmemTotalSize    CacheRatio
0 GB                   505 GB           N/A
377 GB                 128 GB           1:2.9
505 GB                 0 GB             1:3.9

Display Security State Command

Syntax

pmmsecuritystate

Description

Displaying the Security state of dimms.

Parameters

  • -h, --help

Displays help on the usage of this command.

Example

Displaying the Security state of dimms

iLOrest > pmmsecuritystate

+-------------+----------+
| Location    | State    |
|-------------+----------|
| proc1dimm2  | Disabled |
| proc1dimm5  | Disabled |
| proc1dimm8  | Disabled |
| proc1dimm11 | Disabled |
| proc2dimm2  | Disabled |
| proc2dimm5  | Disabled |
| proc2dimm8  | Disabled |
| proc2dimm11 | Disabled |
+-------------+----------+
Previous page
Next page